Elements of Geometry

 Mind Maps

Class IX - Maths: The Elements of Geometry
Q) The word Geometry comes from the which word?

Q) What is the meaning of geo and metrein in Geometry?

Q) In ancient India, what were the manuals of geometrical constructions?

Q) Who developed the concept of geometry?

Q) Geometry was developed in which country?

Q) Explain briefly about Postulate 1?

Q) Explain briefly about Postulate 2?

Q) Explain briefly about Postulate 3?

Q) Explain briefly about Postulate 4?

Q) Explain briefly about Postulate 5?

Q) Explain in detail, the history of geometry?

Q) Explain in detail, the Euclids definition?

Q) Explain in detail, about the Axioms ?

Q) Explain in detail, about the Postulates?

Contents
• Introduction
• Euclid's Definitions, Axioms and Postulates
• Equivalent Versions of Euclid’s Fifth Postulate
• Euclid's five postulates
• Examples
3.1 Introduction

You may have seen large structures like bridges,dams,school builidings,hospitals,hostels the construction of these structures is a big task for the engineers,

Do you know how you estimate the cost of constructions? be sides wages of the labour, cost of elements and concrete. it depend upon the size and shapes of structure.

the size and shapes of structure include the foundations plinth area,size of the walls elevations of roof etc. To understanding to geometric principal involve in these constructions, we should know the basic elements of geometry and its applications

We also know that geometry is widely used in daily life activities such as paintings, handicrafts laying of flooe designs, ploughing and sowing of seeds in fileds. So in other worlds, We can say that the life without geometry is unimanaginable

The greate construction like the pyramids in egypt, the Great wall of chine, Temples, Mosques,cathedral,tajmahal,charminar and altars in india,eifel tower of france etc.are some of the best examples of applications of geometry.

In this chapter, we will look into the history to understand the roots of geometry and the different schools of thougth that have developed the geometry and its comparison with modern geometry

3.2 History

The domains of mathematics which study the sahpe and size of structure are described under geometry. The word geometry is derived from the Greek 'geo' mean earth and 'metrein' means measure

The earliest recorded beginnings of geometry can be traced to early people, who discovered obtuse angle triangles in the ancient Indus valley and ancient Baby lonia. The 'Bakshali manuscript' employs a handful of geometric problems including problems about volumes of irregular solids.

Remnants of geometrical knowledge of the Indus valley civilization can be found in excavations at harappa and mohenjo -Daro where there is evidence of circle-drawing instruments from as early as 2500 B.C.

The'sulba sutras' in vedic sanskrit lists the rules and geometric principal involve in the construction of ritual fire altars. the amazing idea behind the construction of fire altarsis that they occupy same area althought differ in their shapes. Boudhayana composed the Boudhayana Sulba Sutra, the best-know Sulba sutra which contains examples of simple pythagorean theorem for the sides of a rectangle.

Ancient Greek mathematicians conceived geometry as the crown jewel of their science.They expanded the range of geometry to many new kinds of figures curves, surfaces and solids.They found the need of establishing a procesed statement as universal truth with the help of logic this idea led the Greek mathematician thales to of deductive proof.

pythagoras of Ionia might have been a student of Thales and the theorem that was named after him might not have been his discovery,but he was probably one of the mathematicians who had given a deductive proof of it. Euclid created the frist system of thought based on fundamental definitions,axioms ,propositions and rules of inference or logic.

3.3 Euclid's Elements Of Geometry

Euclid thougth geometryas an abstract of the world in which they lived. The notions of point, line,plane and soon were derived from what was seen around them. From studies of the space and solid has shape,,size,position and can be moved from one place to another.Its boundaries are called surfaces. They separate one part of the solid from another and are said to have no thickness. The boundaries of the surface are curves or straight lines. These lines end in points.Consider the step from solid to points.

Observe the figure given in the next page. This figure is a cuboid. It has three dimension namely length,breadth and height.If it loses one dimension i.e.height then it will have only two dimension which is rectangle.You know that a rectangle has two dimension length and breadth. If it further loses another dimensioni.e.breadth the it will leave with only line segment and if it has to loses one more dimension,Similarly whenwe the edge of a table or a book, we can visualise it as a line. The end point of a line or the point where two lines meet is a point These are the fundamental terms of geometry. With the use of these terms others like line segment,angle,triangle etc. are defind

Based on the above observation. Euclid defind point,line,plane

In Book I of his elements,Euclid listed 23 definition. Some of them are given below.

• A point is that which has no part
• A line is breadthless length
• The ends of a line are points
• A straight line is a line which lies evenly with the points on itself
• A surface is that which has length and breadth only
• The edges of surface are lines
• A plane surface is asurface which lies evenly with the straigjht lines on itself
• For example, whenever the river Nile overflowed, it wiped out the boundaries between the adjoining fields of different land owners. After such flooding, these boundaries had to be redrawn.
• For this purpose, the Egyptians developed a number of geometric techniques and rules for calculating simple areas and also for doing simple constructions.
• The knowledge of geometry was also used by them for computing volumes of granaries, and for constructing canals and pyramids. They also knew the correct formula to find the volume of a truncated pyramid (see Fig. 5.1).
• You know that a pyramid is a solid figure,the base of which is a triangle, or square, or some other polygon, and its side faces are triangles Fig. 5.1 : A Truncated Pyramid converging to a point at the top.

In the Indian subcontinent, the excavations at Harappa and Mohenjo- Daro, etc. show that the Indus Valley Civilisation (about 3000 BC) made extensive use of geometry. It was a highly organised society.

• The cities were highly developed and very well planned.
• For example, the roads were parallel to each other and there was an underground drainage system. The houses had many rooms of different types.
• This shows that the town dwellers were skilled in mensuration and practical arithmetic.
• The bricks used for constructions were kiln fired and the ratio length : breadth : thickness, of the bricks was found to be 4 : 2 : 1.

In ancient India, the Sulbasutras (800 BC to 500 BC) were the manuals of geometrical constructions.
The geometry of the Vedic period originated with the construction of altars (or vedis) and fireplaces for performing Vedic rites.
The location of the sacred fires had to be in accordance to the clearly laid down instructions about their shapes and areas, if they were to be effective instruments. Square and circular altars were used for household rituals, while altars whose shapes were combinations of rectangles, triangles and trapeziums were required for public worship.
The sriyantra (given in the Atharvaveda) consists of nine interwoven isosceles triangles.
These triangles are arranged in such a way that they produce 43 subsidiary triangles. Though accurate geometric methods were used for the constructions of altars, the principles behind them were not discussed.

These examples show that geometry was being developed and applied everywhere in the world. But this was happening in an unsystematic manner. What is interesting about these developments of geometry in the ancient world is that they were passed on from one generation to the next, either orally or through palm leaf messages, or by other ways. Also, we find that in some civilisations like Babylonia, geometry remained a very practical oriented discipline, as was the case in India and Rome.

• The geometry developed by Egyptians mainly consisted of the statements of results.
• There were no general rules of the procedure. In fact, Babylonians and Egyptians used geometry mostly for practical purposes and did very little to develop it as a systematic science. But in civilisations like Greece, the emphasis was on the reasoning behind why certain constructions work.
• The Greeks were interested in establishing the truth of the statements they discovered using deductive reasoning (see Appendix 1). A Greek mathematician, Thales is credited with giving the first known proof.
• This proof was of the statement that a circle is bisected (i.e., cut into two equal parts) by its diameter. One of Thales' most famous pupils was Pythagoras (572 BC), whom you have heard about.
• Pythagoras and his group discovered many geometric properties and developed the theory of geometry to a great extent.
• This process continued till 300 BC. At that time Euclid, a teacher of mathematics at Alexandria in Egypt, collected all the known work and arranged it in his famous treatise,called 'Elements'.
• He divided the 'Elements' into thirteen chapters, each called a book.
• These books influenced the whole world’s understanding of geometry for generations to come.

In this chapter, we shall discuss Euclid’s approach to geometry and shall try to link it with the present day geometry. 3.3.1 Axioms and Postulates

The Greek mathematicians of Euclid’s time thought of geometry as an abstract model of the world in which they lived. The notions of point, line, plane (or surface) and so on were derived from what was seen around them. From studies of the space and solids in the space around them, an abstract geometrical notion of a solid object was developed.
A solid has shape, size, position, and can be moved from one place to another. Its boundaries are called surfaces. They separate one part of the space from another, and are said to have no thickness. The boundaries of the surfaces are curves or straight lines. These lines end in points.

Consider the three steps from solids to points (solids-surfaces-lines-points).
In each step we lose one extension, also called a dimension.
So, a solid has three dimensions, a surface has two, a line has one and a point has none. Euclid summarised these statements as definitions. He began his exposition by listing 23 definitions in Book 1 of the 'Elements'.
A few of them are given below :

1. A point is that which has no part.
2. A line is breadthless length.
3. The ends of a line are points.
4. A straight line is a line which lies evenly with the points on itself.
5. A surface is that which has length and breadth only.
6. The edges of a surface are lines.
7. A plane surface is a surface which lies evenly with the straight lines on itself.

• If you carefully study these definitions, you find that some of the terms like part, breadth, length, evenly, etc. need to be further explained clearly.
• For example, consider his definition of a point. In this definition, 'a part' needs to be defined. Suppose if you define 'a part' to be that which occupies 'area', again 'an area' needs to be defined.
• So, to define one thing, you need to define many other things, and you may get a long chain of definitions without an end.

For such reasons, mathematicians agree to leave some geometric terms undefined. However, we do have a intuitive feeling for the geometric concept of a point than what the 'definition' above gives us. So, we represent a point as a dot, even though a dot has some dimension.

• A similar problem arises in Definition 2 above, since it refers to breadth and length, neither of which has been defined. Because of this, a few terms are kept undefined while developing any course of study.
• So, in geometry, we take a point, a line and a plane (in Euclid's words a plane surface) as undefined terms.
• The only thing is that we can represent them intuitively, or explain them with the help of 'physical models'.

Starting with his definitions, Euclid assumed certain properties, which were not to be proved. These assumptions are actually 'obvious universal truths'. He divided them into two types: axioms and postulates. He used the term 'postulate' for the assumptions that were specific to geometry.
Common notions (often called axioms), on the other hand, were assumptions used throughout mathematics and not specifically linked to geometry. For details about axioms and postulates, refer to Appendix 1.

Some of Euclid’s axioms, not in his order, are given below :
(1) Things which are equal to the same thing are equal to one another.
(2) If equals are added to equals, the wholes are equal.
(3) If equals are subtracted from equals, the remainders are equal.
(4) Things which coincide with one another are equal to one another.
(5) The whole is greater than the part.
(6) Things which are double of the same things are equal to one another.
(7) Things which are halves of the same things are equal to one another.
These 'common notions' refer to magnitudes of some kind. The first common notion could be applied to plane figures.

• For example, if an area of a triangle equals the area of a rectangle and the area of the rectangle equals that of a square, then the area of the triangle also equals the area of the square.

Magnitudes of the same kind can be compared and added, but magnitudes of different kinds cannot be compared.
For example, a line cannot be added to a rectangle, nor can an angle be compared to a pentagon.
The 4th axiom given above seems to say that if two things are identical (that is, they are the same), then they are equal.

• In other words, everything equals itself. It is the justification of the principle of superposition. Axiom (5) gives us the definition of 'greater than'.
• For example, if a quantity B is a part of another quantity A, then A can be written as the sum of B and some third quantity C.
• Symbolically, A > B means that there is some C such that A = B + C.
Euclid’s five postulates
Postulate 1 :

A straight line may be drawn from any one point to any other point.
Note that this postulate tells us that at least one straight line passes through two distinct points, but it does not say that there cannot be more than one such line. However, in his work, Euclid has frequently assumed, without mentioning, that there is a unique line joining two distinct points.
We state this result in the form of an axiom as follows:
Axiom 5.1 : Given two distinct points, there is a unique line that passes through them. How many lines passing through P also pass through Q (see Fig. 5.4)?
Only one, that is, the line PQ.
How many lines passing through Q also pass through P?
Only one, that is, the line PQ.
Thus, the statement above is self-evident, and so is taken as an axiom.

Postulate 2 : A terminated line can be produced indefinitely.
Note that what we call a line segment now-a-days is what Euclid called a terminated line.
So, according to the present day terms, the second postulate says that a line segment can be extended on either side to form a line (see Fig. 5.5). Postulate 3 : A circle can be drawn with any centre and any radius. You observe that boyh the arms of each angle fall on one above the other all right angle are equal. This is nothing but Euclids fourth axiom.Can you say this for any angle? Euclid take right angle as a reference angle for all the other angle and situation which he state further

Postulate 4 : All right angles are equal to one another.

Now we shall look at the Euclid's Fifth postulate and its equivalent versions.

Postulate 5 : If a straight line falling on two straight lines makes the interior angles on the same side of it taken together less than two right angles, then the two straight lines, if produced indefinitely, meet on that side on which the sum of angles is less than two right angles.

For example, the line PQ in Fig. falls on lines AB and CD such that the sum of the interior angles 1 and 2 is less than 180° on the left side of PQ. Therefore, the lines AB and CD will eventually intersect on the left side of PQ. A brief look at the five postulates brings to your notice that Postulate 5 is far more complex than any other postulate. On the other hand, Postulates 1 through 4 are so simple and obvious that these are taken as 'self-evident truths'. However, it is not possible to prove them. So, these statements are accepted without any proof (see Appendix 1). Because of its complexity, the fifth postulate will be given more attention in the next section.

• Now-a-days, 'postulates' and 'axioms' are terms that are used interchangeably and in the same sense.
• 'Postulate' is actually a verb. When we say "let us postulate", we mean, "let us make some statement based on the observed phenomenon in the Universe".
• Its truth/validity is checked afterwards. If it is true, then it is accepted as a 'Postulate'.
• A system of axioms is called consistent (see Appendix 1), if it is impossible to deduce from these axioms a statement that contradicts any axiom or previously proved statement.
• So, when any system of axioms is given, it needs to be ensured that the system is consistent.

After Euclid stated his postulates and axioms, he used them to prove other results. Then using these results, he proved some more results by applying deductive reasoning. The statements that were proved are called propositions or theorems.
Euclid deduced 465 propositions in a logical chain using his axioms, postulates, definitions and theorems proved earlier in the chain. In the next few chapters on geometry, you will be using these axioms to prove some theorems.

3.3.2 Equivalent Versions of postulate or equivalents of Fifth Postulate

Euclid's fifth postulate is very significant in the history of mathematics. Recall it again from Section. We see that by implication, no intersection of lines will take place when the sum of the measures of the interior angles on the same side of the falling line is exactly 180°. There are several equivalent versions of this postulate.
One of them is 'Playfair's Axiom' (given by a Scottish mathematician John Playfair in 1729), as stated below:
'For every line l and for every point P not lying on l, there exists a unique line m passing through P and parallel to l'.
From Fig. , you can see that of all the lines passing through the point P, only line m is parallel to line l. This result can also be stated in the following form:
Two distinct intersecting lines cannot be parallel to the same line.
Euclid did not require his fifth postulate to prove his first 28 theorems. Many mathematicians, including him, were convinced that the fifth postulate is actually a theorem that can be proved using just the first four postulates and other axioms. However, all attempts to prove the fifth postulate as a theorem have failed. But these efforts have led to a great achievement – the creation of several other geometries.
These geometries are quite different from Euclidean geometry. They are called non-Euclidean geometries.
Their creation is considered a landmark in the history of thought because till then everyone had believed that Euclid’s was the only geometry and the world itself was Euclidean.

• Now the geometry of the universe we live in has been shown to be a non-Euclidean geometry. In fact, it is called spherical geometry. In spherical geometry, lines are not straight.
• They are parts of great circles (i.e., circles obtained by the intersection of a sphere and planes passing through the centre of the sphere).
• In Fig., the lines AN and BN (which are parts of great circles of a sphere) are perpendicular to the same line AB.
But they are meeting each other, though the sum of the angles on the same side of line AB is not less than two right angles (in fact, it is 90° + 90° = 180°).
Also, note that the sum of the angles of the triangle NAB is greater than 180°, as ∠ A + ∠ B = 180°.

Thus, Euclidean geometry is valid only for the figures in the plane. On the curved surfaces, it fails.

1. Which of the following statements are true and which are false? Give reasons for your answers.
(i) Only one line can pass through a single point.
(ii) There are an infinite number of lines which pass through two distinct points.
(iii) A terminated line can be produced indefinitely on both the sides.
(iv) If two circles are equal, then their radii are equal.
(v) In Fig. , if AB = PQ and PQ = XY, then AB = XY.
2. 3. Give a definition for each of the following terms. Are there other terms that need to be defined first? What are they, and how might you define them? (i) parallel lines
(ii) perpendicular lines
(iii) line segment
(v) square
4. Consider two ‘postulates’ given below:
(i) Given any two distinct points A and B, there exists a third point C which is in between A and B.
(ii) There exist at least three points that are not on the same line.
Do these postulates contain any undefined terms? Are these postulates consistent? Do they follow from Euclid’s postulates? Explain.
5. If a point C lies between two points A and B such that AC = BC, then prove that AC = (1/2) AB. Explain by drawing the figure.
6. In Question 4, point C is called a mid-point of line segment AB. Prove that every line segment has one and only one mid-point.
7. In Fig. , if AC = BD, then prove that AB = CD.
8. 9. Why is Axiom 5, in the list of Euclid’s axioms, considered a 'universal truth'? (Note that the question is not about the fifth postulate.)

Exercise 3.3.2

1. How would you rewrite Euclid's fifth postulate so that it would be easier to understand?
2. Does Euclid’s fifth postulate imply the existence of parallel lines? Explain.

Examples how Euclid used his axioms and postulates for proving some of the results

Example 1 : If A, B and C are three points on a line, and B lies between A and C (see Fig. ), then prove that AB + BC = AC. Solution :
In the figure given above, AC coincides with AB + BC.
Also, Euclid's Axiom (4) says that things which coincide with one another are equal to one another. So, it can be deduced that
AB + BC = AC
Note that in this solution, it has been assumed that there is a unique line passing through two points.

Example 2 : Prove that an equilateral triangle can be constructed on any given line segment.
Solution :

In the statement above, a line segment of any length is given, say AB [see Fig.(i)]. Here, you need to do some construction. Using Euclid’s Postulate 3, you can draw a circle with point A as the centre and AB as the radius [see Fig. 5.8(ii)].
Similarly, draw another circle with point B as the centre and BA as the radius. The two circles meet at a point, say C. Now, draw the line segments AC and BC to form Delta ABC [see Fig. 5.8 (iii)].
So, you have to prove that this triangle is equilateral, i.e., AB = AC = BC.
Now, AB = AC, since they are the radii of the same circle (1)
Similarly, AB = BC (Radii of the same circle) (2)
From these two facts, and Euclid's axiom that things which are equal to the same thing are equal to one another, you can conclude that AB = BC = AC.
So, Delta ABC is an equilateral triangle.
Note that here Euclid has assumed, without mentioning anywhere, that the two circles drawn with centres A and B will meet each other at a point.

#### Example 3 : Consider the following statement : There exists a pair of straight lines that are everywhere equidistant from one another. Is this statement a direct consequence of Euclid’s fifth postulate? Explain.

Solution :
Take any line l and a point P not on l. Then, by Playfair's axiom, which is equivalent to the fifth postulate, we know that there is a unique line m through P which is parallel to l.
Now, the distance of a point from a line is the length of the perpendicular from the point to the line. This distance will be the same for any point on m from l and any point on l from m. So, these two lines are everywhere equidistant from one another.
Remark : The geometry that you will be studying in the next few chapters is Euclidean Geometry. However, the axioms and theorems used by us may be different from those of Euclid's.

Non-Educlidian Geometry

The failure of attempts to prove the V postulate, gave new thought to carl Fedrics Gauss, Lobachevsky and Bolyai. They thought V postulate is true or some contrary postulate can be subtituted for it. if substituted with other,We obtain,Geometry different from Euclid's Geometry, hence called non-Euclidean Geometry. If plane is not flat what happens to our theorem?

Let us observe.

Take a ball and try to draw a triangle on it? what difference do you find between triangle on plane and on a ball. you observe that lines of a triangle on paper are straight but not on ball.

See in figure (ii) , the lines AN and BN are perpendicular to the same line AB.But they are meeting at N , even though the sum of the angles on the same side of line AB is not less than two right angles.Also, note that the sum of the angle of the triangle NAB on shere is greater than 180°.as ∠A+∠180∠.

We call the plane on a sphere as a spherical plane. Can any parallel line exist on a sphere? Similarly by taking different planes and related axioms new geometries arise.

Now we prove a theorem, which is frequently used in different results

#### Theorem : Two distinct lines cannot have more than one point in common.

Proof : Here we are given two lines l and m. We need to prove that they have only one point in common.
For the time being, let us suppose that the two lines intersect in two distinct points, say P and Q.
So, you have two lines passing through two distinct points P and Q. But this assumption clashes with the axiom that only one line can pass through two distinct points.
So, the assumption that we started with, that two lines can pass through two distinct points is wrong.
From this, what can we conclude? We are forced to conclude that two distinct lines cannot have more than one point in common.

Summary
1. Though Euclid defined a point, a line, and a plane, the definitions are not accepted by mathematicians. Therefore, these terms are now taken as undefined.
2. Axioms or postulates are the assumptions which are obvious universal truths. They are not proved.
3. Theorems are statements which are proved, using definitions, axioms, previously proved statements and deductive reasining.
4. Some of Euclid's axioms were :
(1) Things which are equal to the same thing are equal to one another.
(2) If equals are added to equals, the wholes are equal.
(3) If equals are subtracted from equals, the remainders are equal.
(4) Things which coincide with one another are equal to one another.
(5) The whole is greater than the part.
(6) Things which are double of the same things are equal to one another.
(7) Things which are halves of the same things are equal to one another.
5. Euclid’s postulates were :
Postulate 1 : A straight line may be drawn from any one point to any other point.
Postulate 2 : A terminated line can be produced indefinitely.
Postulate 3 : A circle can be drawn with any centre and any radius. Postulate 4 : All right angles are equal to one another.
Postulate 5 : If a straight line falling on two straight lines makes the interior angles on the same side of it taken together less than two right angles, then the two straight lines, if produced indefinitely, meet on that side on which the sum of angles is less than two right angles.
6. Two equivalent versions of Euclid’s fifth postulate are:
(i) 'For every line l and for every point P not lying on l, there exists a unique line m passing through P and parallel to l,.
(ii) Two distinct intersecting lines cannot be parallel to the same line.
7. All the attempts to prove Euclid’s fifth postulate using the first 4 postulates failed. But they led to the discovery of several other geometries, called non-Euclidean geometries.
Meritpath...Way to Success!

Meritpath provides well organized smart e-learning study material with balanced passive and participatory teaching methodology. Meritpath is on-line e-learning education portal with dynamic interactive hands on sessions and worksheets.